Suitable for repairing porous and non-porous materials such as wood, textile, leather, cork, metal, glass, plastic, rubber, ceramic tiles, stone, cement and many other materials. Suitable for indoors and outdoors.

Not suitable for Polypropylene (PP), Polyethylene (PE) and P.T.F.E.

The surface must be dry, clean, free of dust and grease.

Can be applied directly from the tube using the fine dispensing nozzle.

Apply the adhesive on one side. Press the parts against each other. Adjustments can be made within 5 minutes. The maximum final bonding strength is reached after approximately 24 hours. This might vary, based on circumstances, like materials, temperature and humidity. After use, let some adhesive come out of the tube before you screw the cap on it.

Loosen the stuck cap under the hot tap and remove any hardened adhesive in the tube cap with a sharp knife.

Use cleaner’s solvent for removing wet adhesive residue. Dry adhesive residue can only be removed mechanically.

Store in tightly closed packaging in a dry, cool and frost-free place.